Page 1 of 1

Valve Gear Eccentric Parts for Mallet 2-8-8-2

Posted: Tue Dec 05, 2017 5:49 pm
by emarcu
I recently purchased the loco from an on-line auction house (not eBay). The photos on the listing did not show the missing eccentric crank and eccentric rod on the right side of the forward motor block. I am looking for those as well as the mounting screws and washers. Any of you guys have them in your parts box? You will be well rewarded if you can provide the parts! Thanks ao much.
Ed

Re: Valve Gear Eccentric Parts for Mallet 2-8-8-2

Posted: Wed Dec 06, 2017 4:54 pm
by Paul Rose
I probably have what U need around here in my junk collection, locating it is the problem, when I get get a chance
I'll root around in the pile & see what I can come up with... Let U know if I turn one up...
Paul R...

Re: Valve Gear Eccentric Parts for Mallet 2-8-8-2

Posted: Fri Dec 08, 2017 12:37 pm
by emarcu
Thanks, Paul! The eccentric rod is 2 9/16 long.

Re: Valve Gear Eccentric Parts for Mallet 2-8-8-2

Posted: Sun Dec 10, 2017 4:29 pm
by R.J DeBerg
You also might try calling Navin who use to have parts for a lot of Aristo products as he was there repair person. Try this num 201-221-6766 He now is the Revolution Dealer. Later RJd